Search Results

Objective To safely taxi from the runway to the gate and perform complete aircraft shutdown while maintaining SOP compliance, passenger comfort, and ground crew safety. Taxi After Landing Initial Rollout PF: Maintain runway centerline Smoothly decelerate usi...

Checklists are used to verify actions, not to perform them. All procedures follow the principle: 👉 FLOW → CHECKLIST Flow: Memory-based actions performed in a logical sequence Checklist: Verification that all required items are correctly set Core Rule “The f...

🔹 PM Flow (Overhead → Pedestal → Screens) BAT 1 + 2 → ON EXT PWR → ON Fuel Pumps → ON ADIRS (3x) → NAV Electrical Panel → CHECK Hydraulics → CHECK Air Conditioning → SET Anti-Ice → OFF Probe/Window Heat → AUTO 🔹 PF Flow (MCDU + Instruments) MCDU INIT A → C...

PM Flow Beacon → ON Doors → CLOSED Fuel Pumps → ON APU BLEED → ON 🔹 PF Flow Confirm pushback clearance Brief start sequence ✅ Before Start Checks Doors → CLOSED Beacon → ON APU BLEED → ON Fuel Pumps → ON

🔹 PM Flow ENG MODE → NORM APU BLEED → OFF APU → OFF Anti-Ice → AS REQUIRED Flaps → SET Pitch Trim → SET 🔹 PF Flow Monitor engine start Verify parameters ✅ After Start Checks Engine Mode → NORM Flaps → SET Trim → SET

🔹PM Flow Flight Controls → CHECK (ECAM) Brake Temp → CHECK Taxi Lights → ON Takeoff Config → VERIFY 🔹 PF Flow Parking Brake → RELEASE Thrust → IDLE / minimal Steering → CONTROLLED ✅ Taxi Checks Flight Controls → CHECKED Instruments → SET Takeoff Briefin...

🔹 PM Flow Cabin → READY ECAM → NORMAL Takeoff Config → CHECK 🔹 PF Flow Line-up briefing Final runway verification ✅ Before Takeoff Checks Flaps → SET Trim → SET Cabin → READY

🔹 PM Flow Gear → UP (on command) Flaps → RETRACT (on schedule) Packs → ON 🔹 PF Flow Follow FD Monitor climb ✅ After Takeoff Checks Gear → UP Flaps → UP Packs → ON

🔹 PM Flow Minimums → SET Nav Aids → SET ECAM → CHECK 🔹 PF Flow Approach Briefing Mode setup ✅ Approach Checks Minimums → SET Approach → BRIEFED Navigation → SET

🔹 PM Flow Gear → DOWN Flaps → FULL Speed → CHECK 🔹 PF Flow Stabilize approach Monitor FD ✅ Landing Checks Gear → DOWN Flaps → FULL Speed → CHECKED

🔹 PM Flow Spoilers → RETRACT Flaps → UP APU → START 🔹 PF Flow Taxi control Vacate runway ✅ After Landing Checks Spoilers → RETRACTED Flaps → UP APU → START

🔹 PM Flow Engines → OFF Beacon → OFF External Power → ON 🔹 PF Flow Parking Brake → SET Confirm shutdown ✅ Shutdown Checks Engines → OFF Beacon → OFF External Power → ON

Flows must be consistent Checklists must not be skipped PF/PM roles must be respected Core Rule “Discipline in flows creates safety in flight.” Outcome Standardized cockpit workflow Reduced workload Airline-level operation

The MCDU (Multipurpose Control and Display Unit) is used to manage: Flight planning Navigation Performance calculations Aircraft guidance Correct setup is essential for safe and efficient flight operations. General Philosophy The FMGS manages the flight on...

Used for basic flight initialization. Required Entries: FROM / TO → Departure & Destination FLT NBR → Flight Number COST INDEX → Airline value CRZ FL → Planned cruise level Key Rule All entries must be cross-checked by PM

Route Input: Insert waypoints / airways Select SID and runway Insert STAR and approach Important: Remove all discontinuities Verify route against briefing Check for incorrect turns Core Rule “No discontinuities without reason.”