Skip to main content

5. Checklists & Flows

5.1 Philosophy

Checklists are used to verify actions, not to perform them. All procedures follow the principle: ...

5.2 Cockpit Preparation

🔹 PM Flow (Overhead → Pedestal → Screens) BAT 1 + 2 → ON EXT PWR → ON Fuel Pumps → ON ADIRS (3x)...

5.3 Before Start

PM Flow Beacon → ON Doors → CLOSED Fuel Pumps → ON APU BLEED → ON 🔹 PF Flow Confirm pushback ...

5.4 After Start

🔹 PM Flow ENG MODE → NORM APU BLEED → OFF APU → OFF Anti-Ice → AS REQUIRED Flaps → SET Pitch Tri...

5.5 Taxi

🔹PM Flow Flight Controls → CHECK (ECAM) Brake Temp → CHECK Taxi Lights → ON Takeoff Config → VER...

5.6 Before Takeoff

🔹 PM Flow Cabin → READY ECAM → NORMAL Takeoff Config → CHECK 🔹 PF Flow Line-up briefing Final...

5.7 After Takeoff

🔹 PM Flow Gear → UP (on command) Flaps → RETRACT (on schedule) Packs → ON 🔹 PF Flow Follow FD...

5.8 Approach

🔹 PM Flow Minimums → SET Nav Aids → SET ECAM → CHECK 🔹 PF Flow Approach Briefing Mode setup ...

5.9 Landing

🔹 PM Flow Gear → DOWN Flaps → FULL Speed → CHECK 🔹 PF Flow Stabilize approach Monitor FD ✅ ...

5.10 After Landing

🔹 PM Flow Spoilers → RETRACT Flaps → UP APU → START 🔹 PF Flow Taxi control Vacate runway ✅ ...

5.11 Shutdown

🔹 PM Flow Engines → OFF Beacon → OFF External Power → ON 🔹 PF Flow Parking Brake → SET Confir...

5.12 Key Principles

Flows must be consistent Checklists must not be skipped PF/PM roles must be respected Core Rul...